Set i-2000 48V Windgenerator + Hybrid Charge Controller iSTA-BREEZE. Find now your wind generator from ISTA BREEZE Company. Robust wind generator Original iSTA-Breeze i-2000. Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable, at the same time unusually light. The housing is equipped with cooling fins and is made of high-strength aluminum.The maintenance-free, sliding contact (without coal) guarantees a good flow of current and thus no twisting of the cable in the mast. Installation in mast tube by plug connection. Required mast tube inner diameter: 37 mm nominal size!
Further technical data further down in the description. This product is used successfully 1000 times worldwide! Product description - Charge Controller. The Wind / Solar Hybrid Charge Controller from IstaBreeze® is an intelligent controller of the wind turbine and solar cells that controls you at the same time. The high-end device can also be used as a monitoring system.
It is used to safely and efficiently charge and control your battery with the Wind Generator / Solar Module combination. With its discreet appearance, simple operation, with integrated protection functions, this device has high efficiency and low no-load losses.This version of the controller will significantly increase the life and stability of the whole system, especially the batteries. In addition, the control electronics in the control cabinet monitors system voltage and brakes the wind turbine when reaching a max. The special features and product information are listed below. Use of external and high quality (Triacs & Hyper Mosfet), solid state components. Increasing the life of the controller.
Microprocessor controlled charge with integrated voltage and current limiting. Integrated 3-phase short-circuit switches (brake switch). Protection against overcharging, deep discharge, short circuit, overload and against incorrect reverse polarity.The generator is automatically braked gently when the battery is full, modern braking system with external load resistance (Dump Load) to avoid immediate blockage of the turbine. Increasing the life of the stator. PRODUCT FEATURES - WIND TURBINE.
SIZE 21 x 61 x 41. WIND SPEED STARTING WIND SPEED 2m/s RATED WIND SPEED 12.5m/s. WEIGHT 650 g (per blade). Cable 10 qmm screw terminals.Charging current PV Ampere max. 10 A Charging current wind amperes max. 33 A charging voltage 52,8V. Cooling External aluminum cooling fins. Display LCD with 6 displays Amper, Watts, RPM, battery voltage, volts, temperature. Dump Load 2.0 KW braking resistor (3.6 ohms) The load resistor can deviate from the picture. Integrated manual stop switch maintenance protection class IP20 (inside area). Nominal Battery Voltage 48 VDC Max.
Input Power of Wind Turbine 2,0 KW Max. Input Power of PV Module 300W. Braking function (electromagnetic short-circuit,) From 59,4V. Operating temperature Normal: 20+55°C/3585%RH Industrial: 30+55°C/3585%RH Temperature Compensation -4mV°C/2V, -35°C-- +80°C, Accuracy: ±1°C. Measurements LxWxH 300x400x200mm Weight 6,5 kg.
The item "Set i-2000 48V Windgenerator + Hybrid Charge Controller iSTA-BREEZE" is in sale since Monday, September 24, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits". The seller is "istabreeze-turkey" and is located in BURGAS. This item can be shipped worldwide.