Set New Air

Set i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE

Set i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE
Set i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE
Set i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE
Set i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE

Set i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE    Set i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE
Set i-700 12V Windgenerator + Charge Controller iSTA-BREEZE. Find now your wind generator from ISTA BREEZE Company. Robust wind generator original IstaBreeze® i-700 / 12V in set. Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable, at the same time unusually light. The housing is made of aluminum, which guarantees optimal cooling of the generator. The maintenance-free sliding contact (without coal) guarantees a good flow of current and thus no twisting of the cable in the mast. Installation in mast tube by plug connection. Required mast tube nominal diameter: 37mm nominal size! The Wind / Solar hybrid charge controller from IstaBreeze® is an intelligent controller of the wind turbine and the solar cells that controls you at the same time. The high-end device thus controls your island system. It is used to safely and efficiently charge and control your battery with the Wind Generator / Solar Module combination. With its discreet appearance, simple operation, with integrated protection functions, this device has high efficiency and low no-load losses. This version of the controller will significantly increase the life and stability of the whole system, especially the batteries. The special features and product information are listed below.

Use of solid state components. Increasing the life of the controller. Microprocessor controlled charge with integrated voltage and current limiting.

Electromagnetic brake control, the generator is automatically braked gently when the battery is full, modern braking system in three steps to avoid immediate blockage of the turbine. Increasing the life of the stator. Protection against overcharging, deep discharge, short circuit, overload and against incorrect reverse polarity. PRODUCT FEATURES - WIND TURBINE.

BODY SUPPORT ELEMENT Die-cast aluminum (powder-coated). GENERATOR Aluminum profile (powder coated). MATERIAL Plastic + 30% glass fibers.

WEIGHT 620 g (per sheet). Battery system voltage 12 - 24 Vdc Auto Detect Battery voltage minimum (12V = 8,5V) (24V = 17,5V) cable 6qmm screw terminals Charging voltage Max.

Wind (12V = 14,6V) (24V = 29,2V) Dimensions LxWxH 150x170x70mm Final charge voltages for the battery types Acid, gel Integrated manual stop switch maintenance LCD display of all relevant operating data (optional) Amper, Watts, RPM, battery voltage, volts, temperature. Maximum input power wind turbine 3 phase AC 750 Watt Maximum output power PV module 300 Watt Thermally conductive housing Anodized aluminum with cooling fins Weight 1,5 kg brake function At 12V = 14.6 At 24V = 29.2 operating temperature Normal: 20 + 55 ° C / 35 85% RH Industrial: 30 + 55 ° C / 35 85% RH temperature compensation -4mV ° C / 2V, -35 ° C-- + 80 ° C, accuracy: ± 1 ° C.

The item "Set i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE" is in sale since Sunday, September 23, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits". The seller is "istabreeze-turkey" and is located in BURGAS. This item can be shipped worldwide.

  • Model: i-700 Wind Turbine Set
  • Custom Bundle: No
  • MPN: Does Not Apply
  • Brand: IstaBreeze®
  • Country/Region of Manufacture: Turkey
  • Non-Domestic Product: No
  • Modified Item: No


Set i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE    Set i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE